1:10 Scale German Parts

German M1916 Helmet with Chin Strap – Dt. Stahlhelm M1916 mit Kinnriemen

• Scale / Maßstab: 1:10
• Approx. height of helmet / ca. Höhe Helm: 20mm
• Material: Resin
• Parts / Teile: 2
• Infosheet / Infoblatt: English
• Code: BS01

Contents Spare Part / Inhalt Ersatzteil:

• Steel Helmet M1916 / Stahlhelm M1916
• Chin Strap / Kinnriemen

German Carbine Kar. 98 AZ with Muzzle Protector – Dt. Mauser Karabiner 98AZ mit Mündungsschoner

• Scale / Maßstab: 1:10
• Approx. length / ca. Länge: 114mm
• Material: Resin
• Parts / Teile: 2
• Infosheet / Infoblatt: English
• Code: BS06

Contents Spare Part / Inhalt Ersatzteil:

• Mauser Carbine Kar. 98 AZ with Muzzle Protector – Dt. Mauser Karabiner 98AZ mit Mündungsschoner

Mauser Carbine 98 AZ / Mauserkarabiner 98 AZ: (more commonly known as the Kar. 98 AZ) AZ stands for Aufplanz- und Zusammensetzvorrichtung – or stacking hook – one could stand the carbines up in 3s linked to each other by means of the metal hook, at the end of the barrel. Although designated as a 2^nd line weapon, designed for support troops, cavalry etc., many did end up being issued to Stormtrooper units. The Carbine 98 AZ, which was shorter and therefore easier to handle than the standard issued Gewehr 98 rifle used by the infantry proved just as useful. They both had about the same performance within the reduced ranges of trench warfare. A further advantage over the Gewher 98 was that the turn-downed bolt folded against the stock of the carbine with an added undercut into the wood, therefore reducing the danger of being snagged on uniforms and equipment etc. The bolt handle also had a chequered under surface to increase grip. The side-slug sling attachment allowed for a better handling when one was using their hands (cavalry, artillery) and not just marching.

Some examples of the Kar. 98 AZ show the indented finger grooves on the stock – these were a war-time modification, still seen on many of the post-war carbines, now found in museums and with collectors.

Unmistakable on the original photo is the muzzle protector attached to the end of carbine barrel, in front of the foresight. The front of the protector had a hinged cap, which could be lifted upwards if required in a hurry.

German Pistol 08 (Luger) –  P 08

• Scale / Maßstab: 1:10
• Approx. size / ca. Maß: 20 x 27mm
• Material: Resin
• Parts / Teile: 1
• Infosheet / Infoblatt: English
• Code: BS18

Contents Spare Part / Inhalt Ersatzteil:

• German Pistol 08 (Luger) / P 08

Pistol 08 / P 08 (or Luger): The P 08 was first produced in 1900, with the German military taken it on in 1908 – hence the name Pistole 08. As a service pistol it had its drawbacks, mainly it was expensive, difficult to produce and susceptible to dirt. Colour of holster: blackened leather.

Note: The Germans never called this weapon the Luger – this is an anglicised name.

German Water Bottle M1915/17 – Dt. Feldflasche M1915/17

• Scale / Maßstab: 1:10
• Approx. height of bottle (bottom to top of cap) / ca. Höhe Feldflasche (Unterkante Flasche bis Oberkante Verschraubung): 27mm
• Material: Resin
• Parts / Teile: 1
• Infosheet / Infoblatt: English
• Code: BS03

Contents Spare Part / Inhalt Ersatzteil:

• Water Bottle M1915/17 – Dt. Feldflasche M1915/17

German Gas Mask Tin M16 (early version) / Bereitschaftsbüchse M16 (alte Art)

• Scale / Maßstab: 1:10
• Approx. height of tin / ca. Höhe Büchse: 18mm
• Material: Resin
• Parts / Teile: 1
• Infosheet / Infoblatt: English
• Code: BS05

Contents Spare Part / Inhalt Ersatzteil:

• Gas German Gas Mask Tin M16 (early version) / Bereitschaftsbüchse M16 (alte Art)

German Gas Mask Tin M1916 – Dt. Bereitschaftsbüchse M1916

• Scale / Maßstab: 1:10
• Approx. height of tin / ca. Höhe Büchse: 17mm
• Material: Resin
• Parts / Teile: 1
• Infosheet / Infoblatt: English
• Code: BS04

Contents Spare Part / Inhalt Ersatzteil:

• Gas Mask Tin M1916 – Dt. Bereitschaftsbüchse M1916

Gas Mask Tin M16 / Bereitschaftsbüchse M16: At the beginning of 1915, the early type gas masks were issued without any form of container or holder and were often placed within the haversack (bread bag) or in some cases kept in tins, which were fastened by string around the soldier’s neck. Later in 1915, the Canvas Gas Mask Holder, with dividing sections within was issued – Segeltuchtasche für Gasmaske M1915 – here the mask, filter unit and spare filter were kept in tins within and still had to be opened and attached when required. The holder was officially worn on the left side of belt, but is quite often seen at rear, next to the haversack.

In March 1916, the German War Ministry announced the distribution of a Gas Mask Tin, which held the ready for use mask with filter unit already attached. Until the issuing in sufficient numbers, the troops had to do with tins of different manufactures, including the existing canvas holders being modified to carry the mask with filter unit attached.

In June 1916 the Gas Mask Tin M16 / Bereitschaftsbüchse M16 was issued, together with a leather strap, later made from canvas for attachment around the neck. The bottom tin attachment loop could also be attached to a front tunic button, holding the tin in the standby position. If not in this position, the gas tin was kept as before within the canvas holder or slung around the back. Within the tin, the mask could be kept with filter unit attached and ready for use. The gas tins were used until the end of the war, but parallel the new and slightly higher M17 tins were being issued from mid-1917.

Colour: original items show a diversity of colours used on these tins, ranging from field-grey to dark or Khaki-green.

Notes from Sculptor

On the model there is a seam running from top to bottom on the side of tin – this is the overlap join when the can was manufactured, distinctive on the original items. The area behind the 3 strap attachments has been filled out slightly for casting reasons – this can be removed if required.

German Head with Field Cap + Gas Mask Glasses – Dt. Kopf mit Feldmütze und Gasmaskenbrille

• Scale / Maßstab: 1:10
• Approx. width (above ear to ear) / ca. Breite von oberhalb Ohr bis oberhalb Ohr: 16.5mm
• Material: Resin
• Parts / Teile: 3
• Infosheet / Infoblatt: English
• Code: BS07

Contents Spare Parts / Inhalt Ersatzteile:

• Head with Field Cap M17 – Dt. Kopf mit Feldmütze M17
• 2 x Gas Mask Glasses – 2 Stck. Gasmaskenbrille

Gas Mask Spectacles / Gasmaskenbrille: The gas mask spectacles were specifically designed to be worn together with the mask and issued for front-line use to soldiers requiring vision aids. On the normal spectacles of the time, the side arms prevented the mask from fitting tightly against the face, allowing gas to enter. These glasses had short v-shaped double arms, hinged to the front, with adjustable cotton straps, which then looped around the ears securing the glasses in place.

German Head (for helmet) + Gas Mask Glasses – Dt. Kopf (für Stahlhelm) und Gasmaskenbrille

• Scale / Maßstab: 1:10
• Approx. width (above ear to ear) / ca. Breite von oberhalb Ohr bis oberhalb Ohr: 16.5mm
• Material: Resin
• Parts / Teile: 3
• Infosheet / Infoblatt: English
• Code: BS08

Contents Parts / Inhalt Teile:

• Head (for helmet) – Kopf (für Stahlhelm)
  
• 2 x Gas Mask Glasses – 2 Stck. Gasmaskenbrille

German Head with Field Cap – Dt. Kopf mit Feldmütze

• Scale / Maßstab: 1:10
• Approx. width (above ear to ear) / ca. Breite von oberhalb Ohr bis oberhalb Ohr: 16.5mm
• Material: Resin
• Parts / Teile: 1
• Infosheet / Infoblatt: English
• Code: BS10

Contents Part / Inhalt Teil:

• Head with Field Cap M10 – Dt. Kopf mit Feldmütze M10

Other Ranks Field Cap M1910 / Feldmütze M1910: Made out of a field grey material. The piping was in red for all units and the band in black for Pioneer, Artillery & Transport units. The two metal Kokarden badges at the front are – top: national colours Die Reichsfarben: black, white and red (from outwards to the centre) and – bottom: represents the German State where the unit was raised – e.g. Prussia – Preußen: black, white and black. Bavaria – Bayern: white, light blue and white etc.

German Head (for helmet) – Dt. Kopf (für Stahlhelm)

• Scale / Maßstab: 1:10
• Approx. width (above ear to ear) / ca. Breite von oberhalb Ohr bis oberhalb Ohr: 16.5mm
• Material: Resin
• Parts / Teile: 1
• Infosheet / Infoblatt: English
• Code: BS09

Contents Spare Parts / Inhalt Ersatzteile:

• Head (for helmet) – Kopf (für Stahlhelm)